取自 Alexey 的 iproute 文档，适用于 netfilter 并具有更合理的路径。 如果您使用此方法，请注意调整数字以适应您系统的合理值。
如果您想保护整个网络，请跳过此脚本，它最适合单个主机。
似乎您需要最新版本的 iproute2 工具才能使其与 2.4.0 一起工作。
#! /bin/sh -x # # sample script on using the ingress capabilities # this script shows how one can rate limit incoming SYNs # Useful for TCP-SYN attack protection. You can use # IPchains to have more powerful additions to the SYN (eg # in addition the subnet) # #path to various utilities; #change to reflect yours. # TC=/sbin/tc IP=/sbin/ip IPTABLES=/sbin/iptables INDEV=eth2 # # tag all incoming SYN packets through $INDEV as mark value 1 ############################################################ $iptables -A PREROUTING -i $INDEV -t mangle -p tcp --syn \ -j MARK --set-mark 1 ############################################################ # # install the ingress qdisc on the ingress interface ############################################################ $TC qdisc add dev $INDEV handle ffff: ingress ############################################################ # # # SYN packets are 40 bytes (320 bits) so three SYNs equals # 960 bits (approximately 1kbit); so we rate limit below # the incoming SYNs to 3/sec (not very useful really; but #serves to show the point - JHS ############################################################ $TC filter add dev $INDEV parent ffff: protocol ip prio 50 handle 1 fw \ police rate 1kbit burst 40 mtu 9k drop flowid :1 ############################################################ # echo "---- qdisc parameters Ingress ----------" $TC qdisc ls dev $INDEV echo "---- Class parameters Ingress ----------" $TC class ls dev $INDEV echo "---- filter parameters Ingress ----------" $TC filter ls dev $INDEV parent ffff: #deleting the ingress qdisc #$TC qdisc del $INDEV ingress |